Menu
close

  • Mining Dust Suppression Systems in Qatar

    SFLO, we design and supply advanced dust suppression systems for mining sites in Qatar, offering custom-engineered solutions that improve air quality, reduce health risks, and ensure compliance with environmental regulations.Our solutions include fogging systems, dry fog dust suppression, and high-pressure misting systems tailored to crushers, conveyors, haul roads, and stockpiles.

Why Mining Dust Suppression Is Critical

Mining operations generate fine particulate matter (PM10 & PM2.5) that can seriously impact health, equipment performance, and regulatory compliance. Without an effective dust suppression system:

  • Airborne dust reduces visibility, creating unsafe working conditions
  • Fine silica particles can lead to long-term lung diseases like silicosis
  • Dust accumulation causes premature wear and breakdown of machinery
  • Non-compliance with Qatar MOECC environmental regulations can lead to fines or shutdowns

SFLO helps you mitigate these risks with engineered dust control systems tailored for mining operations in Qatar.

Key Dust Generation Points We Address

Mining Dust Suppression

Conveyor Transfer Points

High-efficiency nozzle arrays suppress dust as material moves between belts—this is the primary control point for airborne dust.

Crushers & Screens

Misting and fog systems are deployed around crushers and screeners to reduce dust clouds, improve visibility, and protect nearby equipment.

Stockpile & Stacker/Reclaimer Areas

Zoned fogging systems and mist cannons prevent wind-lifted dust during bulk material stacking and reclaiming operations.

Quarry & Mine Loading Zones

Perimeter mist lines and mobile fog cannons help control dust on haul roads, dump points, and truck loading bays—vital for worker safety and equipment protection.

Oscillating Fog Cannons (30–80 m Throw)
Adjustable angle and distance to suit site layout, ideal for large stockpiles, roads, and demolition zones.

System Components We Use

ComponentDescription
Fog / Mist NozzlesHigh-efficiency nozzles producing 10–50 micron droplets for effective dust capture
Air-Atomizing / Ultrasonic NozzlesUsed in dry fog systems for ultra-fine spray without wetting surfaces
High-Pressure Pumps & FiltersEnsures consistent flow and clean water for optimal nozzle performance
PLC / SCADA-Compatible Control PanelsEnables automation and integration with material handling systems
Fogging CannonsMobile/fixed units with 30–80 meter throw for large open area coverage
Conveyor InterlocksAutomatic spray activation only when equipment is in use, reducing water waste

How Our Dust Suppression System Works

SFLO uses smart dust suppression systems that:

Mist/Fog Spray

Fine droplets (10–50 microns) trap and settle dust.

Dry Fog Option

Ultra-fine mist (1–10 microns) for sensitive zones without wetting.

Automated Zoning

System runs only when equipment is active, saving water and energy.

Benefits of Industrial Direct Dust Suppression Systems

90%+ dust control efficiency (site dependent)

Minimal water usage compared to sprinklers

Cleaner, safer working conditions

Extended machinery life and reduced cleaning

Lower respiratory health risks for workers

No clogging, corrosion-resistant nozzles for mining conditions

Industries & Sites We Serve in Qatar

Mining & Quarry Operations

  • Dust control at blasting sites, haul roads, and conveyor belts
  • Suppression at primary and secondary crushers
  • Dry fog systems at tipping zones and screen plants

Aggregate & Crusher Plants

  • Fogging and misting at hoppers, feeders, and transfer points
  • Stockpile area dust suppression using mist lines or cannons

Cement, Coal & Mineral Stockyards

  • Automated suppression at stacker/reclaimer zones
  • Boundary mist systems to prevent wind-blown dust

Construction & Infrastructure Sites

  • Mobile fog cannons for landfills, demolition, and excavation zones
  • Perimeter barriers and dust fencing combined with misting

Construction & Infrastructure Sites

  • Mobile fog cannons for landfills, demolition, and excavation zones
  • Perimeter barriers and dust fencing combined with misting

Fertilizer & Chemical Processing Plants

  • Safe suppression of airborne chemical dust
  • Suitable for phosphate, ammonium nitrate, and urea plants
Industries & Sites We Serve in Qatar

Turnkey Installation & After-Sales Support

01
🔍

Site Survey & Fog Zone Mapping

Assessment of dust source points, environmental conditions, and system layout planning.

02
🧩

Nozzle Layout & Pipe Routing

Strategic placement of fog/mist nozzles with optimized piping for maximum coverage.

03
🖥️

Control Panel Programming

Smart integration with conveyor or process equipment (manual or PLC/SCADA-based).

04
👷

Operator Training

On-site training for safe and efficient system operation and troubleshooting.

05
🛠️

Preventive Maintenance Contracts

Scheduled servicing, nozzle cleaning, and system checks to ensure peak performance.

06
🚨

Emergency Support

Rapid on-site diagnostics and repairs available across Doha, Mesaieed, Al Khor, and Ras Laffan.

Why Choose SFLO  in Qatar?

Proven Expertise

Trusted supplier for mining and industrial dust suppression systems in Qatar

Custom Solutions

Tailored systems for crushers, conveyors, transfer points, and stockpiles

Dry Fog & Misting Options

Ideal for both moisture-sensitive and high-dust environments

Advanced Technologies

Hybrid systems, fog cannons, and automated controls

Local Presence

Fast delivery and support across Doha, Ras Laffan, Mesaieed & Al Khor

Frequently Asked Questions – Mining Dust Suppression in Qatar

1. What is the best dust suppression system for mining operations?

The most effective dust suppression systems combine misting, dry fog, and fog cannons targeted at dust generation points like crushers, conveyors, and transfer zones.

2. Does dry fog dust suppression work without wetting the surface?

Yes. Dry fog systems use ultra-fine droplets (1–10 microns) that agglomerate with dust particles in the air without wetting the material or ground surface.

3. Can you install dust suppression systems on existing conveyor belts?

Yes. We provide retrofit kits with automated nozzle arrays, pumps, and PLC-based control panels that integrate with your existing conveyor infrastructure.

4. How much water does a mining dust suppression system use?

Our systems are designed for water efficiency. Dry fog nozzles consume as little as 2–5 liters per hour, significantly less than traditional sprinklers.

5. What type of maintenance is required?

Maintenance includes periodic nozzle cleaning, filter replacement, pressure testing, and inspection of pipes and fittings. We offer AMC packages for full support.

6. Do you offer mobile dust cannons for open areas?

Yes. We supply high-performance fogging cannons (30–80m throw) that are trailer- or truck-mounted—ideal for haul roads, demolition, and yard areas.

7. Is your dust suppression system compliant with Qatar's environmental standards?

Absolutely. All our systems meet Qatar MOECC dust emission guidelines and are designed to support safe, eco-friendly mining operations.

8. How quickly can you deliver and install in Qatar?

We offer fast delivery and turnkey installation services across Qatar, including Doha, Mesaieed, Ras Laffan, and industrial zones.

Quick Link

HOME
CONTACT US

ADDRESS

SFLO | Qatar
Building 65, Street 3024,
Zone : 91, P.O Box 80196,
Birkat Al Awamer, 
Qatar
checkmark-circle