Description
Want to save a huge amount of water in your Canteen, Wash area, Public Places, commercial Kitchen?. At Greenly we have wide range of water saving nozzles to save water with various flow pattern and can be retrofitted easily in to existing taps without the replacement. just simple way to save water.
Tap Spray faucet nozzle are of most use to those with older taps in their home which run on average around 15 liters of water per minute. Adding an nozzle to an older tap can reduce this to as little as 6 liters of water per minute. You can install nozzles on 95% of taps however the biggest water saving benefit is achieved in the bathroom or kitchen sinks where you are often turning the taps on and off to wash your hands and for other uses. Tap nozzles can save as much as up to half your water usage through this way. When you are using aerated water, you are unlikely to notice the difference except for saving water resulting in lower bills. Estimates are that nozzles can save you up to 1,400 liters of water a month and when you save water, you will use less gas or oil to heat it and save money on these bills also.
Greenly TrueSpray Nozzle TS1 sprays water in Umbrella pattern and reduces water consumption at taps by 87%.
Advantage:
- Can be retrofitted in any standard 22 mm Diameter Tap(M24/F24 threaded taps). No Tap replacement needed.
- Dispense 1 LPM saving 87% of water consumption at your tap.. Saves 87% of the water.
- Customization (We can provide water flow rates as per your requirement from 1 Liters per minute to 2 liters per minute).
- Solid construction using Stainless steel / Brass material.
- Ergonomic Design.
- Anti rust proof.
- Easy installation and maintenance.
- Made up of brass and coated with Nickel to improve the life.
- Standard Model - 1 & 2 litres per minute.
- Best suitable for Wash basins, Canteen, Vessel Wash area, Public Places and commercial Kitchen.
- Not suitable for Kitchen. Best for use at commercial places or corporate office.
- Operating Working pressure (1 bar to 4 bar).
- Reduce Energy bills.
- Good Return on Investment.
Product Specifications
Weight | N/A |
---|---|
Nozzle Thread Size | M24 (No Adapter), F22, M18, M20 |
Liters Per Minute (LPM) | 1, 2 |
Advantages
- Can be retrofitted in any standard 22 mm Diameter Tap(M24/F24 threaded taps). No Tap replacement needed.
- Dispense 1 LPM saving 87% of water consumption at your tap.. Saves 87% of the water.
- Customization (We can provide water flow rates as per your requirement from 1 Liters per minute to 2 liters per minute).
Reviews
There are no reviews yet.