Skip to content

Industrial supply & engineered solutions · Qatar · Saudi Arabia · UAE · Bahrain · Kuwait · Oman

Lubrication

Automatic Lubrication Systems

Centralised systems that deliver the right lubricant, in the right quantity, at the right time to every bearing and chain. Accurate timing and dosing can cut lubricant consumption by up to 50% while reducing bearing failures and manual greasing at height or near moving parts.

  • Design & layout
  • Installation
  • Refill & service

System types

Single-line

Simple, expandable systems for small to medium machines using oil or grease.

Dual-line

Long pipe runs and many points under harsh conditions, typical of steel and cement plants.

Multi-line

Each pump outlet feeds one point directly; robust for heavy presses and kilns.

Progressive

Metering blocks deliver grease in sequence with easy monitoring of every point.

Oil circulation

Continuous oil flow that lubricates and cools gearboxes and paper-machine bearings.

Oil and air

A fine stream of oil carried by air for high-speed spindles and chains.

Minimal quantity (MQL)

Near-dry machining lubrication that replaces flood coolant.

Chain lubrication

Brush, spray or drip systems that lubricate conveyor and drive chains in motion.

Where automatic lubrication pays back

  • Mining and cement: crushers, mills, kilns and conveyors
  • Steel: casters, rolling stands and cranes
  • On- and off-road machines, construction and agriculture
  • Food and beverage lines using food-grade lubricants
  • Pulp and paper machines
  • Wind turbines and rail applications

How we size a system

  1. Survey

    Count and classify lubrication points, bearing sizes and access.

  2. Select

    Choose the system type, pump, reservoir and metering devices.

  3. Lay out

    Route main and feed lines, and plan monitoring and controls.

  4. Commission

    Fill, bleed, set intervals and hand over a refill schedule.

Products in this range

Automatic Lubrication Systems

Dual-line Lubrication System

Long pipe runs and many points under harsh conditions, typical of steel and cement plants.

Price and availability on enquiry
Get quote

How we work

  1. Tell us the duty

    Share the application, site conditions, drawings or part numbers.

  2. We ask the right questions

    An engineer confirms the selection data before anything is priced.

  3. Clear quotation

    Price, scope, documentation and delivery set out in writing.

  4. Delivery and support

    Supply, installation where agreed, and after-sales follow-up.

Keep exploring

Related products and solutions

Answers before you enquire

Frequently asked questions

Which system suits a machine with a few dozen points?

Single-line or progressive systems usually suit compact machines. Dual-line is chosen when there are hundreds of points, long distances or very stiff grease.

Can a system be retrofitted to existing equipment?

Yes. Most systems are retrofitted. We route lines along existing structures and connect to the current grease nipples or bearing housings.

How is a blocked point detected?

Progressive systems stop cycling if one outlet blocks, which a cycle switch reports. Other systems use pressure switches or flow indicators at the end of the line.

Send the requirement. Start the right conversation.

Share a part number, a photo, a drawing or a complete BOM. Price, availability, technical scope and delivery are confirmed in your quotation.