Fluid connections
Quick Couplings & Nipples
Quick-connect couplings and nipples in steel, stainless steel, brass and aluminium. High-flow, low pressure-drop designs save energy on every tool and line; flat-face and dry-break designs keep fluids where they belong.
- Valved & valveless
- Flat-face & dry-break
- Multi-couplings
Coupling ranges by medium
Compressed air
Safety and standard couplings for tools, hoses and distribution drops.
Hydraulic
Low to high-pressure couplings for mobile equipment and power units.
Ultra-high-pressure hydraulic
Couplings for bolting, jacking, rescue and test equipment.
Breathing air
Couplings for respiratory protection lines and airline systems.
Gas
Couplings for industrial, welding and laboratory gases.
Fluid
Couplings for water, coolants and other process fluids.
Thermal control
Non-drip couplings for cooling circuits in electronics and moulds.
Hydraulic plug-in fittings
Push-in connections that speed up assembly and service.
Specify a coupling correctly
- Medium and operating pressure
- Flow rate required at the point of use
- Connection size, thread or hose tail
- Body material and seal material
- Need for a valve on one side, both or neither
- Interchange profile already used on site
Products in this range
Breathing air Quick Couplings
Couplings for respiratory protection lines and airline systems.
Price and availability on enquiryCompressed air Quick Couplings
Safety and standard couplings for tools, hoses and distribution drops.
Price and availability on enquiryFluid Quick Couplings
Couplings for water, coolants and other process fluids.
Price and availability on enquiryGas Quick Couplings
Couplings for industrial, welding and laboratory gases.
Price and availability on enquiryHydraulic plug-in fittings Quick Couplings
Push-in connections that speed up assembly and service.
Price and availability on enquiryHydraulic Quick Couplings
Low to high-pressure couplings for mobile equipment and power units.
Price and availability on enquiryThermal control Quick Couplings
Non-drip couplings for cooling circuits in electronics and moulds.
Price and availability on enquiryUltra-high-pressure hydraulic Quick Couplings
Couplings for bolting, jacking, rescue and test equipment.
Price and availability on enquiryHow we work
Tell us the duty
Share the application, site conditions, drawings or part numbers.
We ask the right questions
An engineer confirms the selection data before anything is priced.
Clear quotation
Price, scope, documentation and delivery set out in writing.
Delivery and support
Supply, installation where agreed, and after-sales follow-up.
Keep exploring
Related products and solutions
Industrial Hoses
Drilling, composite, hydraulic, stainless and marine hose assemblies.
Automatic Lubrication
Centralised lubrication that doses every bearing on schedule.
Lubrication Tools
Grease guns, filler pumps and drum pumps.
Oil Filtration Units
Offline units that clean oil in the tank while machines run.
Answers before you enquire
Frequently asked questions
Why does pressure drop matter for air couplings?
A restrictive coupling starves the tool, so the compressor has to run at a higher pressure. High-flow couplings deliver the same work with less energy.
What is a dry-break or non-spill coupling?
It is a coupling whose valves close flush on disconnection, so almost no fluid is lost and no air enters the line. They are used for fuels, chemicals and cooling circuits.
Can you match couplings already installed on our site?
Yes. Send the markings and a photo of both halves. We identify the interchange profile and supply compatible sockets and plugs.
Send the requirement. Start the right conversation.
Share a part number, a photo, a drawing or a complete BOM. Price, availability, technical scope and delivery are confirmed in your quotation.