Skip to content

Industrial supply & engineered solutions · Qatar · Saudi Arabia · UAE · Bahrain · Kuwait · Oman

Drives & motion

Variable Frequency Drives (VFD / AC Drives)

Match the drive to the motor and the duty, not just the kilowatts. We supply VFDs and complete VFD panels for pumps, fans, compressors, conveyors and hoists, with the supply voltage, overload class and interfaces confirmed before you order.

  • 0.37 kW upward
  • 1-phase & 3-phase
  • IP20 to IP66

Drive families

General-purpose drives

Compact V/f and sensorless vector drives for conveyors, mixers and small machines.

Pump and fan drives

HVAC and water drives with PID, multi-pump and energy functions.

Heavy-duty industrial drives

High-overload drives for crushers, extruders, hoists and mills.

Low-harmonic and regenerative drives

For weak networks, cranes, lifts and test rigs.

VFD control panels

Enclosed panels with breaker, filter, reactor, bypass and controls.

Options and accessories

Fieldbus cards, keypads, braking resistors, EMC and dV/dt filters.

Selection data we confirm

ItemWhy it matters
Motor nameplate current and voltageDrives are sized on current, not only kW
Normal or heavy dutySets the overload the drive must deliver
Supply: phases, voltage, frequencyA matching kW with the wrong supply will not work
Ambient temperature and enclosureGulf ambients require derating or cooling
Motor cable lengthLong cables may need output filters
Control: I/O and fieldbusMust match the PLC or BMS on site

Typical applications

  • Booster and transfer pumps with constant-pressure control
  • Cooling tower, AHU and extraction fans
  • Conveyors, feeders and crushers
  • Cranes, hoists and winches
  • Compressors and blowers

Products in this range

VFD / AC Drives

General-purpose drives

Compact V/f and sensorless vector drives for conveyors, mixers and small machines.

Price and availability on enquiry
Get quote
VFD / AC Drives

Pump and fan drives

HVAC and water drives with PID, multi-pump and energy functions.

Price and availability on enquiry
Get quote
VFD / AC Drives

VFD control panels

Enclosed panels with breaker, filter, reactor, bypass and controls.

Price and availability on enquiry
Get quote

How we work

  1. Tell us the duty

    Share the application, site conditions, drawings or part numbers.

  2. We ask the right questions

    An engineer confirms the selection data before anything is priced.

  3. Clear quotation

    Price, scope, documentation and delivery set out in writing.

  4. Delivery and support

    Supply, installation where agreed, and after-sales follow-up.

Keep exploring

Related products and solutions

Answers before you enquire

Frequently asked questions

Is a drive with the same kW always a valid replacement?

No. Supply voltage, overload class, frame size, control interfaces and parameters all have to match the application. Send the nameplate and we will review it.

Do VFDs need derating in the Gulf climate?

Often. Many drives are rated at 40 or 50 °C and must be derated above that, or installed in a ventilated or air-conditioned panel.

How much energy can a VFD save on a pump or fan?

On centrifugal loads, power falls roughly with the cube of speed, so a 20% speed reduction can cut power by close to half. Actual savings depend on the duty profile.

Can you supply a complete VFD panel?

Yes. Panels are built with protection, filters, bypass and controls to your single-line diagram and site standard.

Send the requirement. Start the right conversation.

Share a part number, a photo, a drawing or a complete BOM. Price, availability, technical scope and delivery are confirmed in your quotation.